G13SE2

Excellent overload durability. Easy to use large paddle switch/dead mans switch. Keyless adjustable wheel guard.

Spindle lock and disc guard.

Power input: 1200W.

No load speed: 10,000rpm.

Spindle thread: M14x2.

Weight: 1.90kg.

Accessories: pin spanner, side handle, abrasive disc.

DPR813

13mm Jacobs chuck, thumb switch for reverse, auxiliary handle, suitable for screwdriving, heavy-duty planetary gearing.

Air inlet thread: 1/4¡± NPT. Minimum hose : 3/8¡± (10mm).

Chuck capacity: 13mm. Spindle thread: 3/8¡± - 24.

Air pressure: 90psi/6.3bar. Air consumption: 4cfm*

Sound pressure level: 89dBA. Sound power level: 101dBA.

Vibration level: 2.5m/s2. Overall length: 178mm.

*Based on a 15 second cycle per minute average use.

FPD500

Suitable for high torque drilling applications as well as screwdriving, hole sawing and cylinder honing. Rubber handle provides grip and operator comfort. 1/2¡± chuck. Adjustable side handle. Short gear case design. Heavy duty gearing system with oil-less

bushing. Spring loaded rotor vanes. Rear exhaust.

Ball bearing construction for a long tool life.

Spindle thread: 3/8¡± - 24.

Air inlet thread: 1/4¡± NPT.

Minimum air hose size (ID): 3/8¡± (10mm).

Air pressure: 90psi/6.2bar.

Air consumption: 3.65cfm*.

Sound pressure level: 95dBA.

Sound power level: 100dBA.

Vibration level: 0.4m/s2.

Overall length: 240mm.

*Based on a 15 second cycle per minute average use.

GA1807L

Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard. For grinding only

Free speed: 7000rpm.

Grinding disc size: 180x6.3x22.2mm.

Air inlet thread: 1/4" NPT.

Air hose size (ID): 10mm.

Air pressure: 90PSI.

Air consumption: 6,1/2 CFM*

Overall length: 340mm.

Weight: 3.6kg.

Sound power level: 109dB(A).

Sound Pressure/ Noise level: 103dB(A).

Vibration level: 2.6m/s.

*Based on a 15 second cycle per minute average use.

MBS025-X

Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler.

Free speed: 18,000rpm.

Air inlet thread: 1/4¡± NPT.

Minimum air hose size (ID): 10mm (3/8¡±).

Air consumption: 4cfm* (113ltr/min).

Air pressure: 90psi/6.3bar.

Motor power: 0.6hp.

Noise Level: 84dBA

Sound Power: 92dBA

Vibration: 0.8m/s

Overall length: 390mm.

*Based on a 15 second cycle per minute average use.

Suitable for flat, concave and convex surfaces. Sanding arm can be rotate to any angle - improved access in confined spaces, saves space when storing the tool. Spare belt and hex wrench included. Ergonomic and comfortable rubber grip for reduces vibration. Low profile teasing throttle for precise speed control. Directional rear exhaust.

Air inlet thread: 1/4¡± NPT

Minimum air hose size (ID): 10mm (3/8¡±).

Air consumption: 4cfm* (113ltr/min).

Air pressure: 90psi/6.2bar.

Overall length/folded length:

R5218: 305/207mm,

R5228: 470/310mm,

R5238: 420/255mm.